Back To Top

APN / MMS Settings

  • H20
  • Ultra Mobile
  • Simple Mobile
  • Page Plus
  • Expo Mobile
  • Net 10
  • Boost Mobile
  • Lyca Mobile
Apn Settings for Androids
  • Go to Settings
  • Tap Wireless & Networks
  • Tap Mobile Network
  • Tap Access Point Names
  • Press Menu and enter select New APN
  • Enter the Settings as shown below:
    • Name: H2O Wireless
    • APN: a t t . m v n o
    • Proxy: Not set
    • Port: Not set
    • Username: Not set
    • Password: Not set
    • Server: Not set
    • MMSC: http:// mmsc.cingular.com
    • MMS Proxy:wireless.cingular.com
    • MMS Port: 80
    • MCC: 310
    • MNC: 410
    • Authentication Type: Not set
    • APN Type: default,supl,mms
    • APN Protocol: IPv4
Always Restart your device after Completing APN Settings
Apn Settings for iPhone
  • Log in iphone to wifi
  • Open safari and type unlockit.co.nz
  • Select Create APN
  • Select Country :United States
  • Carrier : H20
  • Create APN
  • Install APN right corner of iphone
  • Turn phone off and on
  • Device should be ready if funds are available
Always Restart your device after Completing APN Settings
Apn Settings for Androids
  • Go to Settings
  • Tap Wireless & Networks
  • Tap Mobile Network
  • Tap Access Point Names
  • Press Menu and enter select New APN
  • Enter the Settings as shown below:
    • Name: Ultra
    • APN: wholesale
    • Proxy: blank
    • Port: blank
    • Username: blank
    • Password: blank
    • Server: blank
    • MMSC: http://wholesale.mmsmvno.com/mms/wapenc
    • MMS Proxy:blank
    • MMS Port: blank
    • MCC: 310
    • MNC: 260
    • Authentication Type: blank
    • APN Type: default,supl,mms
Always Restart your device after Completing APN Settings
Apn Settings for iPhone
  • Log in iphone to wifi
  • Open safari and type unlockit.co.nz
  • Select Create APN
  • Select Country :United States
  • Carrier : Ultra Mobile
  • Create APN
  • Install APN right corner of iphone
  • Turn phone off and on
  • Device should be ready if funds are available
Always Restart your device after Completing APN Settings
Apn Settings for Androids
  • Go to Settings
  • Tap Wireless & Networks
  • Tap Mobile Network
  • Tap Access Point Names
  • Press Menu and enter select New APN
  • Enter the Settings as shown below:
    • Name: SIMPLE Mobile
    • APN: SIMPLE
    • Proxy: Not set
    • Port: Not set
    • Username: Not set
    • Password: Not set
    • Server: Not set
    • MMSC: http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS Proxy:Not set
    • MMS Port: Not set
    • MCC: 310
    • MNC: 260
    • APN Type: default,supl,mms,admin
Apn Settings for iPhone
Apple iPhone - Internet and MMS (iOS 6 or later)
  • Go to "Settings", tap on WiFi and temporarily turn it OFF
  • Back in "Settings", scroll down to "Messages" and tap to open it. Make sure MMS is OFF
  • Go back to "Settings", tap on "General" and then "Cellular". Make sure "Enable 3G" is OFF & "Data Roaming" is ON
  • Scroll down & tap on "Cellular Data Network"
  • Under "Cellular Data Network" put in the following:
    • Cellular Data APN: simple
    • MMS APN: simple
    • MMSC: http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc
    • MMS Proxy: 216.155.165.50:8080
    • MMS Max Message Size: 1048576
    • MMS UA Prof URL: http://www.apple.com/mms/uaprof.rdf
    • Leave all other fields blank
  • Click on the Home button to go back to the main phone screen
  • Go back to "Settings" one more time, scroll down and tap on "Messages" and turn it ON
  • Press the Home button and you're set to send & receive MMS on SIMPLE Mobile!
  • Once you have set it up and tested to see it works, you can re-enable WiFi, turn off Data Roaming and turn on 3G (or leave it off if you're not in a 3G area for AT&T devices on our network).
OR
  • Log in iphone to wifi
  • Open safari and type unlockit.co.nz
  • Select Create APN
  • Select Country :United States
  • Carrier : Ultra Mobile
  • Create APN
  • Install APN right corner of iphone
  • Turn phone off and on
  • Device should be ready if funds are available
Apn Settings for Androids iPhones 3G & 2G
  • Activate the phone in the dealer portal
  • when phone is activated to program dial
    • *228
    • *22890
  • Follow the instructions in the dial pad dial #1 for proggraming
  • turn phone off and on
  • Verify if data is working
Apn Settings for Androids & iPhones 4G
  • Activate Phone in portal & funds
  • Insert sim card and turn on phone
  • Phone will take 2 - 5 minutes to fully program talk text and web
  • turn phone off and On
  • Phone should be working perfectly
Apn Settings for Androids
  • One Touch Programming**
    • From the home screen, tap the All Apps icon.
    • Scroll to and tap Phone Settings/About Phone
    • Scroll to and tap System updates.
    • Tap Update profile.
    • After the update is complete, tap OK.
    • Repeat the above steps (1-3) then update the following (Update PRL, Firmware Update, Software Update)
    • You've now completed one touch programming.
    Note: If One Touch Programming fails, continue to Device Profile Reset guide.
    **The instructions above are general programming instructions, it might vary based on your phone model.
    • Device Profile Reset
      • From the home screen, tap Phone on which you can dial any numbers.
      • Dial ##72786# (for Galaxy Nexus phones dial *#*#72786#*#* )
      • Your device displays a SCRTN screen.
      • Tap Menu.
      • Tap Reset
      • Enter your 6-digit programming code (also known as the MSL#), if you do not have this code, please contact our customer service.
      • Tap OK.
      • Tap OK to confirm.
      • After it restarts, your device is ready to be used.
      • You've now reset your device.
      Note: If Device Profile Reset fails, proceed to Manual Programming guide.
  • Manual Programming
    ##MSL# (if you do not have MSL code, please contact our customer service.)
    • From the home screen, tap Phone on which you can dial any numbers.
    • Dial ##MSL# (for Galaxy Nexus phones dial *#*#MSL#*#*).
    • Select Edit Mode
    • Update the MDN and the MSID as shown on the Expo Mobile™ Portal, then click Enter
    • Select Done, to save the updated information
    • The phone will be restarted.
Apn Settings for iPhone
Over The Air Activation (OTA)

If this is the first time activating your device, hands free activation automatically starts when you power it on for the first time.

Device Network Reset

If this is not the first time activating your device, or hands free activation did not complete successfully, try first to Reset Network Settings.

  • From the home screen, tap Settings
  • Tap General
  • Scroll all the way to the bottom and tap on Reset
  • Tap Reset Network Settings
  • Tap Reset Network Settings (This will delete all network settings, returning them to the factory defaults.)
Update the data profile (Preferibly with WiFi Enabled/connect to a WiFi and Disable Cellular DATA)

If this is not the first time activating your device, or hands free activation did not complete successfully, update the data profile.

  • From the home screen, tap Phone.
  • On the keypad, dial ##873283# and tap Call.
  • Tap OK.
  • Your device searches for profile updates and installs them.
  • Tap Dismiss.
  • Tap the Home key.
  • You've now updated the data profile
Apn Settings for Androids
  • Go to Settings
  • Tap Wireless & Networks
  • Tap Mobile Network
  • Tap Access Point Names
  • Press Menu and enter select New APN
  • Enter the Settings as shown below:
    • Name: NET10
    • APN: tfdata
    • Port: 80
    • MMSC: http://mms-tf.net
    • MMS Proxy:mms3.tracfone.com
    • MMS Port: 80
    • MCC: 310
    • MNC: 410
    • APN Type: default
Apn Settings for iPhone
  • Log in iphone to wifi
  • Open safari and type unlockit.co.nz
  • Select Create APN
  • Select Country :United States
  • Carrier : NET 10
  • Create APN
  • Install APN right corner of iphone
  • Turn phone off and on
  • Device should be ready if funds are available
Always Restart your device after Completing APN Settings
Apn Settings for Androids
  • One Touch Programming**
    • From the home screen, tap the All Apps icon.
    • Scroll to and tap Phone Settings/About Phone
    • Scroll to and tap System updates.
    • Tap Update profile.
    • After the update is complete, tap OK.
    • Repeat the above steps (1-3) then update the following (Update PRL, Firmware Update, Software Update)
    • You've now completed one touch programming.
    Note: If One Touch Programming fails, continue to Device Profile Reset guide.
    **The instructions above are general programming instructions, it might vary based on your phone model.
Apn Settings for iPhone
Over The Air Activation (OTA)

If this is the first time activating your device, hands free activation automatically starts when you power it on for the first time.

Device Network Reset

If this is not the first time activating your device, or hands free activation did not complete successfully, try first to Reset Network Settings.

  • From the home screen, tap Settings
  • Tap General
  • Scroll all the way to the bottom and tap on Reset
  • Tap Reset Network Settings
  • Tap Reset Network Settings (This will delete all network settings, returning them to the factory defaults.)
Update the data profile (Preferibly with WiFi Enabled/connect to a WiFi and Disable Cellular DATA)

If this is not the first time activating your device, or hands free activation did not complete successfully, update the data profile.

  • From the home screen, tap Phone.
  • On the keypad, dial ##873283# and tap Call.
  • Tap OK.
  • Your device searches for profile updates and installs them.
  • Tap Dismiss.
  • Tap the Home key.
  • You've now updated the data profile
Apn Settings for Androids
  • Go to Settings
  • Tap Wireless & Networks
  • Tap Mobile Network
  • Tap Access Point Names
  • Press Menu and enter select New APN
  • Enter the Settings as shown below:
    • Name: Lycamobile Internet
    • APN: data.lycamobile.co.uk
    • Port: Not set
    • Username: lmuk
    • Password: plus
    • APN Type: default
Apn Settings for iPhone
  • Log in iphone to wifi
  • Open safari and type unlockit.co.nz
  • Select Create APN
  • Select Country :United States
  • Carrier : Lyca Mobile
  • Create APN
  • Install APN right corner of iphone
  • Turn phone off and on
  • Device should be ready if funds are available
Chat with us